Set up of these takes approximately 15 minutes and you can take your plunge anywhere with you.

Step 1: Inflate and Prepare the Tub

Inflate the tub using the pump provided.

Wipe it clean to ensure it's free from dirt and debris.

Ensure there is adequate space to fit the hoses without any obstructions from walls or other objects.

Step 2: Connect Hoses and Filter

Connect the hoses and the external filter to both the chiller and the tub. Green to Green and Red to Red.

External filter connects to the chiller inlet.

Ensure all connections are tight to avoid leaks.

Step 3: Fill the Tub

Fill the tub with water. Given the water quality in Perth, using filtered water is suggested.

Any water filtration system, such as a portable caravan filter, can be used, but it is not necessary.

Once the water level is above the outlet hose, you can turn the chiller on.

Fill the tub to below

the “max” depth to avoid over flow.

Step 4: Turn on the Chiller

Step 5: Set Up the Smart App

Use the instructions provided to connect to the smart app.

Set your preferences for turning on/off and adjusting the temperature.

If you are new to cold water immersion, it is recommended to start with a temperature below 15 degrees Celsius, but to avoid shock far from the minimum temperature.

Step 6: Chill and Enjoy

Wait for the water to reach your desired temperature.

Enjoy your cold plunge!

Step 1: Prepare the Tub

Ensure the cedar tub is clean and placed in a suitable location with adequate space for the hoses and equipment, free from obstructions.

Our Tubs are designed to fit through standard doorways. They can be easily manouvered into the desired location.

Understand your Local Council pool fencing laws and adhere to them.

Step 2: Connect Hoses and Filter

Connect the hoses and the external filter to both the chiller and the tub. Green to Green and Red to Red.

The external filter connects to the chiller inlet.

Ensure all connections are tight to avoid leaks.

Place the Chiller Box over the chiller and flush with the tub.

Step 3: Fill the Tub

Fill the tub with water. Due to the water quality in Perth, using filtered water is suggested.

Any water filtration system, such as a portable caravan filter, can be used, but it is not necessary.

Once the water level is above the outlet hose, you can turn the chiller on.

Step 4: Turn on the Chiller

Turn on the chiller to start cooling the water.

Step 5: Set Up the Smart App

Use the instructions provided to connect to the Smart App.

Set your preferences for turning on/off and adjusting the temperature.

If you are new to cold water immersion, it is recommended to start with a temperature below 15 degrees Celsius, but avoid going too close to the minimum to prevent shock.

Step 6: Chill and Enjoy

Wait for the water to reach your desired temperature.

Enjoy your cold plunge in your permanent cedar tub!

As the chiller units heat or cool, they expel either hot or cold air through the fan.

You must ensure there is adequate ventilation so that your fan can remove the heat (when cooling) from the water appropriately.

This should be at least 1m from any walls, including the ice bath tub to ensure that the machine can function efficiently without overheating.

Inadequate ventilation can reduce the lifespan of crucial components, including the compressor which is very costly to repair.

By ensuring adequate ventilation you will improve the longevity of your chiller and reduce the chances of costly repairs.

If you have specific questions in relation to your available space, please reach out with us for advice.